Table of Contents
Advertisement
IP-7700 Only
3
Flange holder
Capping unit side
4
IP-7900
IP-7700
CAUTION
- Media rolls and scrollers are heavy. To prevent injuries, lifting of these components should always be performed by
two or more persons and attention must be paid not to let them fall. Additional persons may be required if these
components seem to be too heavy. Lifting objects that are too heavy may lead to physical injuries.
- To prevent injuries when loading or replacing the media, use a dolly equipped with a lifter (recommended dolly). If
carried by hand, hold the media by the scroller shaft.
- Be careful not to catch your finger or hand between the Printer and the scroller shaft.
On carrying the media alone:
Recommended dolly
Knob screw
Shaft holder
Wiping unit side
Printer rear
Remove the flange holder, and open the shaft
holder.
To open the shaft holder, loosen the knob screw.
Load the media roll into the Printer's rear side
(supply side).
CAUTION
- Be careful not to trap your hand or fingers between
the Printer and scroller shaft.
When carried by two or more persons
Scroller shaft
35
Advertisement
Table of Contents
