Table of Contents
Advertisement
5
IP-7700 Only
Flange holder
6
Capping unit side
7
CAUTION
- Media rolls and scrollers are heavy. To prevent injuries, lifting of these components should always be performed by
two or more persons and attention must be paid not to let them fall. Additional persons may be required if these
components seem to be too heavy. Lifting objects that are too heavy may lead to physical injuries.
- To prevent injuries when loading or replacing the media, use a dolly equipped with a lifter (recommended dolly). If
carried by hand, hold the media by the scroller shaft.
- Be careful not to catch your finger or hand between the Printer and the scroller shaft.
On carrying the media alone:
Recommended dolly
Rotate the scroller flange manually to take up
the media.
Remove the flange holder, and open the shaft
Shaft holder
holder.
To open the shaft holder, loosen the knob screw.
Knob screw
Wiping unit side
Remove the media roll from the Printer.
When carried by two or more persons
Scroller shaft
51
Advertisement
Table of Contents
