Table 5-13
Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the display (see
Remove the power connector cable:
1.
Disconnect the power connector cable from the system board (1).
2.
Use a tool to release the power connector from the computer (2).
Reverse this procedure to install the power connector cable.
Keyboard with top cover
The top cover with keyboard remains after removing all other spare parts from the computer. In this section,
the first table provides the main spare part number for the top cover/keyboards. The second table provides
the country codes.
Table 5-14
Keyboard with top cover descriptions and part numbers
Description
Backlit, natural silver, no fingerprint reader
Backlit, natural silver, fingerprint reader
Not backlit, natural silver, no fingerprint reader
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
33).
Display assembly on page
31).
47).
Spare part number
M50400-001
31).
Spare part number
M50456-xx1
M50457-xx1
M50458-xx1