Kathrein UFS 946/CI+ Operating Instructions Manual page 7

Front view:
1. On/Off button (operation/standby)
2. Channel selection (P-)
3. 16 character display
4. Channel selection (P+)
* ) CI+/CI modules and Smartcards are not included in the product package
** ) Pressing the Off switch does not full disconnect the unit from the mains (see the sections "Safety
Instructions - Important Notes" and "Periods of extended absence, thunderstorms, mains socket
accessibility")
Tip!
The serial number sticker for the UFS 946/CI+ is located on the underside of the unit.
The information printed on it includes the following:
- the exact designation (e.g. UFS 946/CI+)
- the part number and
- the serial number of the unit.
You do not need this information in order to operate the unit. If however, contrary to expectations, you
need to make a claim under warranty and you do not have the packaging for the receiver to hand,
you can fi nd the above information about the unit on this sticker.
Connection and set-up
Rear view:
5. LNB input (IF INPUT)
6. Common Interface for fi tting one
CI+/CI module for Pay TV cards *
7. Network connection (Ethernet)
8. USB 2.0 port (USB-A connector)
9. HDMI connection
10. Video output (CVBS) cinch socket
11. Audio outputs (L/R) cinch sockets
12. Optical data stream output (SPDIF/
Sony Philips Digital Interface Format)
for Dolby Digital AC 3 audio
13. Electrical digital data stream output
(SPDIF/Sony Philips Digital Interface
Format) for Dolby Digital AC 3 audio
14. Infra-red sensor connection
15. On/Off switch **)
16. Power supply connection (12 V)
)
7