Kathrein UFS 946/CI+ Operating Instructions Manual page 43

If there have been changes to the ASTRA channel list, you will see the following on-screen display(s)
(example):
If you do not want to edit the channel positions of new channels you can leave the corresponding
screen by pressing the
recommended by the receiver.
or:

Pressing the button takes you directly to the "Edit TV-Channellist" menu. If you wish to modify
the channel list, please see Operating Instructions – Part 2, section "Mainmenu - Edit TV-Channellist".
Tip!
On completion of a successful fi rst installation (TV picture can be seen) we recommend having the
receiver search for any available software update. In order to do this, you must have selected (included
in the selection) the satellite ASTRA 19.2° East in the fi rst installation. Press the
to the Mainmenu. Use the

button. Now use the

the button to confi rm. The receiver will now automatically start to search for new software. For
information on the rest of the update process, refer to the section "Mainmenu", "Service Menu",
"(Software) Update by satellite" in the Operating Instructions – Part 2.
Tip!
Once the fi rst installation has been successfully carried out you may change the channel list(s) as
you wish. See Operating Instructions – Part 2, section "Mainmenu - Edit TV-Channellist".
Connection and set-up

button. The new channels will then be saved in the channel positions

buttons to select "Service Menu" and confi rm by pressing the

buttons to select "Software Update by Satellite" and then press

button to switch
43