First Installation - Kathrein UFS 946/CI+ Operating Instructions Manual

Before you start to use the UFS 946/CI+, read the sections "Safety instructions
- Important notes" and "Connection and set-up" through to the item "First
installation".
Do not connect the unit to the mains until all installation work has been properly
carried out.
The guidance provided in the "First installation" section assumes that the receiver has been
properly connected as per the "Safety instructions - Important information" and "Connection
and set-up" sections through to the "First installation" section.
Buttons on the remote control required for fi rst installation:
 
...

(red)


First switch your TV set on and select the AV-/HDMI input you have used to connect the receiver to
your TV set. Switch on the receiver at the power switch on the rear of the unit. Now perform the fi rst
installation. If you have any questions or encounter problems, contact your specialist dealer.
The following on-screen display appears:
Tip!
Always check the bar at the
bottom of the on-screen display.
This provides information on
what to do next.

Use the buttons to select the desired menu language for your UFS 946/CI+ and confi rm your

selection using the
are available: German, English, French, Italian, Spanish, Czech, Dutch, Polish, Turkish and Russian.
12
Connection and set-up

First installation

Number input
Go back one step in the
fi rst installation
Select/change individual
menu parameters, navigation
Cancel entry, go back
button. The selected language is indicated with a tick. The following languages
Call up the next step in the

(green)
Confi rm the changed values/

setting; call up the submenus
fi rst installation