Kathrein UFS 946/CI+ Operating Instructions Manual page 36

Hide thumbs Also See for UFS 946/CI+:

Table of Contents

When you have completed all settings, press the

Number of Satellites

Only one satellite can be received with the UAS 481. This setting cannot be altered.

Select the line "Satellite 1: .....". To set

or change the currently selected satellite,



press the

button. The following

on-screen display appears (example):

Satellite:

Select the desired satellite using the

view a list of all stored satellites then select the required satellites from this list.

Test-Transponder:

Select the "Test-Transponder" ﬁ eld. Here you can select a transponder for checking whether your

settings are correct using the signal strength bar and signal quality bar.

When you have completed all settings for the selected satellites, press the

When you have completed all settings, press the

display the screen for the channel search. Continue the ﬁ rst installation with the "Channel search" section.

Connection and set-up



button.



buttons. Alternatively you can press the





button.

(green) button. The receiver will automatically



button to

Table of Contents