Kathrein UFS 946/CI+ Operating Instructions Manual page 41

To view encrypted channels you need an appropriate CI (Common Interface) module and a valid
Smartcard together with a valid subscription to the relevant Pay TV provider.
Network Search (NIT)

Use the buttons (On/Off) to select whether a network scan should be performed. If you set
the network search to "Off", only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to "On", the
transponder network enables additional transponders that have not yet been stored to be located.
These are then stored and searched for new channels in the same way as the existing transponders.
When you have completed all settings, press the
fi rst (example):
During this process the receiver
updates the channel list based on
the ASTRA channel list broadcast
by ASTRA (LCN list).
* ) The ASTRA channel list is used to
update the channel list stored on
the receiver. See also the Operating
Instructions Part 2, section entitled
"Mainmenu - Channel Search", "LCN
(Update ASTRA channel list)".
Connection and set-up

(green) button. The following displays appear at
41