Kathrein UFS 946/CI+ Operating Instructions Manual page 15

The following on-screen display appears:
Tip!
If your receiver is connected up as in the connection example (see the illustration in
"Connecting the receiver" in this section), only one change/selection is necessary in the
rest of the fi rst installation. If you are not familiar with the details of your reception system,
note the following:
In many cases the satellite reception system is a DiSEqC™1.0 system.
This type of system is preset. Confi rm the current on-screen displays using the

Using the
Germany usually ASTRA 19.2° East) and confi rm your choice with the
rest of the on-screen displays during the fi rst installation using the
cannot damage your reception system! If there is no TV picture at the end of the fi rst installation,
contact your specialist dealer.
You should perform the tuner confi guration/make changes yourself only if you are
fully familiar with the particulars of your reception system.
You can set up the tuner confi guration for the following types of reception systems:
- DiSEqC™1.0
- DiSEqC™1.1
- Motorized antenna (DiSEqC™1.2/DiSEqC™1.3 (USALS))
- LNB only or
- One Cable
- Mobile antenna - HDZ 60
Now continue as described for the type of reception you selected in the fi rst installation.
Connection and set-up
buttons you then select the required satellites in the satellite selection (in

(green) button.

button. Confi rm the

(green) button. This process
15