Panasonic KX-VC1300 User Manual page 156

Using Multicast
Note
•
Only IPv4 addresses can be used for the multicast feature.
When "Contact list" is selected
•
The contact list screen is displayed.
Use [ ][
•
The multicast target screen is displayed.
Note
•
To continue registering multicast targets, repeat the procedure from step 6.
•
Register multicast targets starting from the lowest available node ID. The node ID of a ""Not
Registered"" target cannot be selected for registration if it is not the lowest available number.
7.
Press [G].
•
A dialogue box to confirm the saving of settings is displayed.
8.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
Note
•
To continue registering multicast trees, repeat steps 2–8 of the procedure.
Editing Registered Contents
1.
In step 7 of "Administrator Menu List (Page 121)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [ ][ ] to select the multicast tree to edit.
3.
Press [B].
•
The multicast tree setting screen is displayed.
4.
Use [ ][ ] to select the item to edit, and then edit it.
5.
Press [G].
•
A dialogue box to confirm the saving of settings is displayed.
6.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
Deleting Registered Contents
1.
In step 7 of "Administrator Menu List (Page 121)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
][ ] to select the multicast tree to delete.
Use [
156 User Manual
] to select the other party to register and press [ENTER].
Document Version 2015-12