Changing Video Camera Settings; Making Language Settings - Panasonic KX-VC1300 User Manual

Note
•
While the dialogue box is displayed, video
conference calls cannot be received.
When "Remote ID enable" is set to "OFF":
The system settings screen is displayed. Press
[HOME] to return to the Home screen.
6.
Use the following procedure to change the ID of the
remote control.
1.
Press and hold [·] and [#] at the same time.
2.
Within 2 seconds after you release the buttons,
press the number (1 to 3) corresponding to the
ID that you specified for "Remote control ID"
in step 1.
–
1: ID1
–
2: ID2
–
3: ID3
7.
Press [ENTER].
•
The dialogue box disappears and the remote
control ID of the unit will be saved.
Note
•
If the dialogue box does not disappear,
repeat the procedure above, several times
if necessary. If the dialogue box still does
not disappear, turn the power off and then
back on to cancel the settings. For details,
contact your dealer.
Changing Video Camera
Settings
1.
Select "Camera Settings" and press [ENTER].
•
The video camera settings screen is displayed.
2.
Use [ ][ ] to select the following items for input:
"CAM ctrl from remote site(s)": Use [
select whether to allow the other party to control
your video camera.
–
"ON": Allows the other party to control your
video camera.
–
"OFF" (default): Prevents the other party from
controlling your video camera.
"Direct Cam Ctrl during call": Use [
select whether camera operation by remote control
is enabled during a video conference call.
–
"ON" (default): Allow camera operations using
the remote control.
Document Version 2015-12
–
"OFF": Do not allow camera operations using
the remote control.
"Direct Cam Ctrl on Home Screen": Use [
[ ] to select whether camera operation by remote
control is enabled when not in a video conference
call.
–
"ON" (default): Allow camera operations using
the remote control.
–
"OFF": Do not allow camera operations using
the remote control.
"Pan Direction": Use [
direction in which the video camera will move when
the buttons on the remote control are pressed.
–
"Normal" (default): The video camera will
move in the left/right direction, as viewed from
the video camera.
–
"Reversed": The video camera will move in the
left/right direction, as viewed from the subject.
"FIX Cam's Remote Ctrl Rcvr": Use [
select whether the FIX camera or the unit will
receive commands from the remote control.
–
"ON": The FIX camera will receive commands
from the remote control.
–
"OFF" (default): The unit will receive
commands from the remote control.
Note
•
"Layout change camera control": Use [
select whether the layout will change while the
camera is being controlled.
–
"ON" (default): The layout will change.
–
"OFF": The layout will not change.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
][ ] to
•
The system settings screen is displayed.

Making Language Settings

1.
Select "Language Setting" and press [ENTER].
][ ] to
•
The language settings screen is displayed.
Contacts and Settings
][
If a FIX camera is not connected or
depending on the model of the FIX camera,
the unit will receive commands from the
remote control even if "ON" is selected.
][ ] to select "Yes" and press [ENTER].
]
] to select the
][ ] to
][ ] to
User Manual 117