Panasonic KX-VC1300 User Manual page 107

Server") will be obtained automatically from a
DHCP server or will be set manually.
–
"Auto" (default): Obtain the IP address
information automatically.
–
"Manual": Set the IP address information
manually.
Note
•
To select "Auto", "IP Address (LAN
1)" (setting) must be set to "Auto".
•
The DNS server setting is necessary to use
the following features.
–
Call by specifying the host name
–
Setting the SIP server or gatekeeper
address by host name
–
Checking for software updates
–
Downloading the latest version over the
network
"Primary DNS Server": Enter the IP address of the
primary DNS server.
"Secondary DNS Server": Enter the IP address of
the secondary DNS server.
Note
•
"Primary DNS Server" and "Secondary
DNS Server" can be entered only if "DNS
Server" is set to "Manual".
•
If the value for "Primary DNS Server" or
"Secondary DNS Server" contains 1 or 2
digits numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
3.
If the settings for LAN1 are changed: Press [G].
•
A dialogue box to confirm the saving of settings
is displayed. Save the settings.
To set IPv6: Press [R].
•
The second page is displayed.
To set LAN2: Press [R] twice, and then proceed to
step 6.
Setting IPv6
Note
•
For the KX-VC1300, "IPv6 (LAN 1)", "IPv6
Address (LAN 1)" (setting), "IPv6
Address (LAN 1)" and "Prefix length
(LAN 1)" are respectively displayed as
Document Version 2015-12
"IPv6", "IPv6 Address" (setting), "IPv6
Address", and "Prefix length".
4.
Use [ ][ ] to select the following items for input:
"IPv6 (LAN 1)": Select "ON" or "OFF" (default).
Note
•
When "ON" is selected, both the IPv4
address and IPv6 address will be displayed
on the unit information screen. On the upper
right of the home screen, only the IPv4
address is displayed.
"IPv6 Address (LAN 1)" (setting): Select whether
the IPv6 address will be obtained automatically or
will be set manually.
–
"Auto (SLAAC)" (default): Automatically
obtains IP address information from the router.
–
"Auto (DHCP)": Automatically obtains IP
address information from the DHCP server.
–
"Manual": IP address information is set
manually.
Note
•
When "Auto (DHCP)" is set, the default
gateway address is obtained from the RA
(router advertisement).
•
Even if "Auto (SLAAC)" or "Auto
(DHCP)" is set, in some cases the IP
address information cannot be obtained
due to network failures or other
occurrences. In such cases, the IPv6
address is displayed as "–" on the unit
information screen. Contact your network
administrator.
"IPv6 Address (LAN 1)": Enter this unit's IPv6
address.
"Prefix length (LAN 1)": Enter the prefix length of
the IPv6 address.
"Default Gateway (IPv6)": Enter the IPv6 address
of the default gateway for IPv6.
Note
•
"IPv6 Address (LAN 1)" and "Prefix
length (LAN 1)" can only be input when
"IPv6 Address (LAN 1)" (setting) is set to
"Manual".
•
For the input format for "IPv6 Address
(LAN 1)" and "Default Gateway (IPv6)",
refer to Page 43.
•
For "IPv6 Address (LAN 1)", set your
network's global address.
"Primary DNS Server (IPv6)": Enter the IPv6
address of the primary DNS server for IPv6.
Contacts and Settings
User Manual 107