Panasonic KX-NSX2000 Operating Manual page 74

1.4.5 Multiple Party Conversation
To disconnect one party and then talk to the other in a three-party conversation
PT/PS
During a conversation
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
The other party will be put on hold.
•
* In this case, the FLASH/RECALL button on a proprietary telephone must be set to Flash/
Recall mode through system programming.
•
During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the other parties in the conversation.
•
You can have a conference with a maximum of eight parties (comprising intercom or outside
lines) simultaneously.
•
During a conversation involving four or more parties, you cannot disconnect one party and
maintain the conversation with the other parties.
•
SIP phone users cannot originate a conference call, but can be added as a member.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Conference button.
Leaving a Conference (Unattended Conference)
The person who originated a conference can leave the conference, and allow the
other parties to continue the conversation.
To leave a conference
PT/PS
During 3- to 7-party conference
Press CONF.
74 Operating Manual
Press FLASH/RECALL.*
On-hook.
(CO)
OR
(ICD Group)
OR
(PDN)
OR
(SDN)
OR
Press the flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the party on hold.
Talk.