Panasonic KX-NSX2000 Operating Manual page 21

Button
Single-CO (S-CO)
Direct Station Selection
(DSS)
One-touch Dialling
Incoming Call Distribution
Group (ICD Group)
Message
Message for Another
Extension
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Group FWD—Both calls
Group FWD—Outside calls
Group FWD—Intercom calls
Account
Conference
Terminate
External Feature Access
(EFA)
Call Charge Reference
Call Park
Call Park (Automatic Park
Zone)
Call Log
Call Log for ICD Group
Log-in/Log-out
Log-in/Log-out of a specified
group
Log-in/Log-out for all groups
Hurry-up
Wrap-up
Used to access a specified outside line for making or receiving outside
calls.
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
Used to access a desired party or system feature with one touch.
Used to access a specified incoming call distribution group for making or
receiving calls.
Used to leave a message waiting indication or call back the party who
left the message waiting indication.
Used to have a Message button for another extension.
Used to forward all calls to a specified destination or refuse.
Used to forward outside calls to a specified destination or refuse.
Used to forward intercom calls to a specified destination or refuse.
Used to forward all the calls to your group to a specified destination.
Used to forward the outside calls to your group to a specified destination.
Used to forward the intercom calls to your group to a specified
destination.
Used to enter an account code.
Used to establish a multiple party conversation.
Used to disconnect the current call and make another call without
hanging up.
Used to access special features offered by a host PBX or a telephone
company.
Used to check the total call charge for your own extension.
Used to park or retrieve a call in a preset parking zone.
Used to park a call in an idle parking zone automatically.
Set both the Call Park (Automatic Park Zone) button and the Call Park
(preset parking zone) button.
Used to show the incoming call information.
Used to have a Call Log button for incoming call distribution group.
Used to switch between the log-in and log-out mode.
Used to have a Log-in/Log-out button for another incoming call
distribution group.
Used to have a Log-in/Log-out button for all groups.
Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.
Used to switch the wrap-up status, Ready and Not Ready mode.
1.1.5 Before Operating the Telephones
Feature
Operating Manual 21