Panasonic KX-NSX2000 Operating Manual page 286

4.1.3 Supervisory Monitor (ACD) Control
c.
Click ==> to move the ICD group you selected in step b. to the Selected Group for ACD Report
window. (Maximum 64 groups)
To delete an ICD group from the Selected Group for ACD Report window, click the ICD group
name, and then click <==.
d.
Click OK.
2.
Select the target time period for the ACD report on Call—Filter Settings—Select Period.
3.
Select the target for an ACD report from the following, and then configure the filter settings on the Call—
Call Filter Mode screen.
•
Caller ID/CLIP Filter: You can filter by Caller ID or CLIP.
a.
Click Caller ID/CLIP Filter.
b.
Enter the caller ID or CLIP as the target to analyse (maximum 10).
•
Talk/Wait Duration Filter: You can filter by continuous talk time or wait time.
a.
Click Talk/Wait Duration Filter.
b.
Select Talk Time or Wait Time from the Mode drop-down list.
c.
Set the target time range to filter.
To set the minimum time duration, click Min., and set the time (0:00–23:59).
To set the maximum time duration, click Max., and set the time (0:00–23:59).
•
Lost Call Filter: You can filter by lost calls.
a.
Click Lost Call Filter.
4.
To show the report on a group basis, perform the following steps:
a.
Click View Report.
The ACD Report - Call Report screen is displayed.
The filtered data is shown as follows:
286 Operating Manual