Panasonic KX-NSX2000 Operating Manual page 235

•
Before the Message Manager can perform Message Management (recording Custom
Service Menus, messages, etc.), "Message Manager Access from Telephone" must be
enabled and "Password for Message Manager (Up to 16 numeric digits)" must be set by the
System Administrator using Web Maintenance Console.
•
After logging in, the system will announce the number of total messages, the number of new
messages, or the length of new messages. These announcements depend on the mailbox
settings and COS settings for the Message Manager.
•
If there are new messages in the mailbox, the messages will be played automatically. The
Message Manager can listen to them continuously without listening to the system prompts.
This feature is only available when "Autoplay New Message" is activated for the Message
Manager's COS.
•
For more information on logging in, refer to "
•
Manager Service switching
You can switch mailboxes simply by pressing ## from the subscriber service menu, in the
following order:
Manual log-in
PT/SLT/PS/SIP Extn.
Off-hook.
Press MESSAGE or Voice Mail
Transfer, or enter UM group's
floating extension number.
Message Manager password
Enter Message Manager password and #.
Subscriber service
OR
(Voice Mail
Transfer)
OR
UM group's floating
extension no.
#
Logging in to Your Mailbox".
Message Manager service
6
#
Enter #6. Enter
mailbox number (default: 998).
Enter Message Manager's
Mailbox
2.2.2 Message Manager Features
System Manager service
Message Manager's
mailbox no.
and Message Manager's
Operating Manual 235