Panasonic KX-NSX2000 Operating Manual page 276

3.2.1 User Programming
Item
FWD No Answer Time (s)
Call waiting Mode
Phone Display Language
Dial Lock
Display Lock
Device in use (for CTI)
These phone numbers are set in the Home tab of the My Portal screen.
*1
Storing names and numbers in personal speed dialling
You can set frequently dialled numbers using two-digit speed dialling numbers (00–99). A maximum of 100
Personal Speed Dialling numbers can be programmed at your extension for your personal use.
1.
In the Directry tab, enter the name of the Personal Speed Dialling number to call in Speed Dialling -
Personal Name (max. 20 characters).
2.
Enter the number to be dialled by the Personal Speed Dialling number in Speed Dialling - Personal
Number (max. 32 digits consisting of 0–9,
3.
Click OK.
Logout
To logout of Web Maintenance Console, click the
return to the Login screen. When this option is chosen, system data is automatically backed up from the
PBX to the Storage Memory Card.
1.
Click the (logout) button.
A confirmation message will be displayed.
2. Click Yes.
•
If the computer running the Web browser that is connected to Web Maintenance Console is
shut down, or the Web browser is closed, any changes that have not been saved will be
lost. Always end your programming session by clicking the
information, consult your System Administrator.
276 Operating Manual
Specifies the length of time that the Unified Messaging system waits
before handling unanswered calls to the extension. Select the desired
time from the FWD No Answer Time (s) drop-down list.
Select the Call Waiting mode from the For external calls drop-down
list and the For internal calls drop-down list respectively.
To specify the language displayed on the LCD of the display PT, select
the displayed language from the Phone Display Language drop-down
list.
To activate Dial Lock, click Dial Lock.
To activate Display Lock, click Display Lock.
To specify the device controlled with CTI, select the desired device
from the Device in use (for CTI) drop-down list.
, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]).
(logout) button to end the programming session and
Description
(logout) button. For more