Panasonic KX-NSX2000 Operating Manual page 245

for FWD Busy.
2
for FWD No Answer.
3
for FWD Busy or No Answer.
4
for FWD to Outside, then go to step 6.
5
for FWD Cancel, then go to step 9.
6
4.
Enter the extension number.
5.
to accept the extension number, then go to step 10.
2
•
Enter to change the extension number, then go to step 4.
1
6.
Enter the desired number.
for telephone number 1, then go to step 8.
1
for telephone number 2, then go to step 8.
2
for another telephone number.
3
•
Before you can forward your calls to telephone number 1 or 2, you should first store the telephone
numbers you plan on using with this feature.
7.
Enter the telephone number (
•
Make sure you begin the telephone number with an outside line access number (to seize an outside
line).
8.
to accept, then go to step 10.
2
•
Enter to change the telephone number, then go to step 6.
1
9.
to accept.
2
10.
The new settings are transmitted to the system. If the setting has been completed properly, you will
hear: "Call forwarding accepted" or "Call forwarding is cancelled" as appropriate.
•
If the system announces, "Call forwarding not accepted. Please check the destination
number.", the forwarding setting has not been completed properly, possibly because a
nonexistent extension number has been entered as the destination. For more information,
consult your System Administrator.
Setting the Timed Reminder
The Message Manager can set or cancel the Timed Reminder. The telephone will ring at the set time
according to the set mode (Once/Daily).
•
This feature is not available for PSs.
•
This feature is not available when the Message Manager's extension (assigned for Operator
1 in the Day Mode) is "default". In this case, it should be changed to the operator's
extension number. For more information, consult your System Administrator.
To set/cancel
1.
Log in to the Message Manager's mailbox.
2.
6
3.
Enter the desired number.
– , ). (max. 32 digits)
0 9
2.2.2 Message Manager Features
Operating Manual 245