Panasonic KX-NSX2000 Operating Manual page 116

1.8.2 Logging in to and Configuring Your Mailbox
To change your password
PT/SLT/PS/SIP Extn.
Log in to your mailbox.
2
Enter 2 to accept.
CAUTION
•
It is strongly recommended that a password of 16 numbers be used for maximum
protection against unauthorised access.
•
To avoid unauthorised access to the PBX, keep the password secret. If it becomes
known to others, the PBX may be misused.
•
Change the password periodically.
Changing or Deleting Your Subscriber (Owner) Name
You can record your name in the Unified Messaging system. The system can then announce your name for
callers to let them know that they have reached the correct mailbox.
To change/delete your subscriber name
PT/SLT/PS/SIP Extn.
Log in to your mailbox.
2
Enter 2 to accept.
Common Service Commands and Navigation Commands
Commands for Changing the Current Unified Messaging System Service
After going off-hook and pressing the MESSAGE button, Voice Mail Transfer button, or enter the UM group's
floating extension number, you can enter a service command to access certain Unified Messaging system
features quickly. While guidance is being provided, you can also use service commands to, for example,
switch to a different Unified Messaging system service mode.
# 1
116 Operating Manual
4 2 1
Enter 421.
On-hook.
4 3 1
Enter 431.
Enter 433 to delete your subscriber name,
then go on-hook to finish.
On-hook.
Dialling by Name
your desired password
Enter the desired password and #.
C.Tone
State your name.
#
1
Enter 1 to end recording.