Panasonic KX-NSX2000 Operating Manual page 14

1.1.1 For Your Safety
•
Plug the power cord firmly into an AC outlet. Otherwise, it can cause fire or electric shock.
For All Telephone Equipment
The product should be kept free of dust, moisture, high temperature (more than 40 ℃), and vibration, and
•
should not be exposed to direct sunlight.
•
Unplug the product from the wall outlet before cleaning. Wipe the product with a soft cloth. Do not clean
with abrasive powders or with chemical agents such as benzine or thinner. Do not use liquid cleaners or
aerosol cleaners.
For the NSX server
•
When relocating the equipment, first disconnect the telecom connection before disconnecting the power
connection. When the unit is installed in the new location, reconnect the power first, and then reconnect
the telecom connection.
•
The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near
the equipment and is easily accessible.
•
Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect it
from overheating, these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface while in use. The product
should never be placed near or over a radiator or other heat source. This product should not be placed in
a sealed environment unless proper ventilation is provided.
•
When this product is no longer in use, make sure to detach it from the rack or wall.
•
To protect this unit from static electricity, do not touch any external connectors of the unit.
Notice
For All Telephone Equipment
•
Read and understand all instructions.
•
When using a Panasonic proprietary telephone (PT), use only the correct Panasonic handset.
For the NSX server
•
Keep the unit away from heating appliances and devices that generate electrical noise such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of
the NSX server.
•
If you are having problems making calls to outside destinations, follow this procedure to test the
outside lines:
1.
Disconnect the NSX server from all outside lines.
2.
Connect known working single line telephones (SLTs) to those outside lines.
3.
Make a call to an external destination using those SLTs.
14 Operating Manual
CAUTION