Setup (Menu) Mode - Yaesu FTM-3200DR Operating Manual

Setup (Menu) Mode

The FTM-3200DR Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the [ MHz ( SETUP )] key for
one second to enter the Setup menu.
2. Rotate the DIAL knob to select the Menu
Item to be adjusted.
3. Press the [ MHz ( SETUP )] key momentarily
to enable adjustment of the selected Menu
item, and then rotate the DIAL knob to per-
form the actual adjustment.
4. After completing the selection and adjust-
ment, press and hold the [ MHz ( SETUP )] key
for one second to exit the Setup menu and
resume normal operation.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
Menu Item
Enables/Disables the Automatic Power
1: APO
Off feature.
Enables/Disables the Busy Channel
2: BCLO
Lock-Out feature.
3: BEP KEY
Enables/Disables the key beeper.
Enables/Disable the Band-edge beeper
4: BEP EDGE
while scanning.
5: BEP STBY
Enables/Disable the Standby beep
Selects the CTCSS/DCS/EPCS Bell
6: BELL
Ringer repetitions.
7: CLK TYPE
Shifting of the CPU clock frequency.
8: DC VOLT
Indicates the DC Supply Voltage.
9: DCS CODE
Setting of the DCS code.
Select a combination of DCS inversion
10: DCS INV
codes in terms of communication direc-
tion.
11: DIG AMS
Sets the transmission mode
12: DI POPUP
Sets the information pop-up time
13: DSQ CODE
Sets the squelch code in digital mode.
14: DSQ TYPE
Sets the squelch type in digital mode.
Enables/Disables the DTMF Autodialer
15: DT AUTO
feature.
32
Function
VOL
SQL REV D/A
TXPO D W
Available Values
0.5H to 12H (0.5H step)/
OFF
ON/OFF
KEY+SCAN/KEY/OFF
ON/OFF
ON/OFF
1 to 20/CONTINUE/OFF
A/B
---
104 standard
codes
N O R M A L / I N V E R T /
BOTH
TXMANUAL/TX FMFIX/
TX DNFIX/AUTO
2 / 4 / 6 / 8 / 1 0 / 2 0 / 3 0 / 6 0 /
CONTINUE/OFF
001 to 126
OFF/CODE/BREAK
MANUAL/AUTO
FTM-3200DR Operating Manual
DIAL
M H z V / M
M W
SETUP
Default
OFF
OFF
KEY+SCAN
OFF
ON
OFF
A
---
DCS
023
NORMAL
TXMANUAL
10 SEC
CODE 001
OFF
MANUAL