Setting The Transmission Mode When Using The Ams Function - Yaesu FTM-3200DR Operating Manual

Setting the transmission mode when using the AMS function

TXMANUAL (" " blinks: 1 sec on, 0.5 sec off)
Automatically selects one of the two communication modes according to the received
signal. Briefly pressing [ PTT ] on the microphone switches between digital mode and
analog mode.
TX FMFIX (" " blinks: 0.5 sec on, 0.5 sec off)
Automatically selects one of the two communication modes according to the received
signal. Always switches to FM mode for transmission.
TX DNFIX (" " blinks: 0.5 sec on, 0.5 sec off)
Automatically selects one of the two communication modes according to the received
signal. Always switches to DN mode for transmission.
AUTO (" " blinks: 0.5 sec of, 0.5 sec off)
Automatically selects one of the two communication modes according to the received
signal.
FTM-3200DR Operating Manual
D: DN mode
F: FM mode
Blinks: 1 sec on, 0.5 sec off
FM mode
Blinks: 0.5 sec on, 0.5 sec off
DN mode
Blinks: 0.5 sec on, 0.5 sec off
D: DN mode
F: FM mode
Blinks: 0.5 sec on, 0.5 sec off
Basic Operation
17