Maintenance; Care And Maintenance; Replacing The Fuse; Dc Power Supply Cable - Yaesu FTM-3200DR Operating Manual

Care and maintenance

Turn the power OFF before wiping away any dust and stains on the transceiver with a dry
soft cloth. For stubborn stains, slightly moisten a soft cloth and wring it out before using it
to wipe away the stains.
Caution: Never use washing detergents and organic solvents (thinner, benzene, etc.).
Doing so may result in paint flaking or damage to the transceiver finish.

Replacing the fuse

When the fuse of the DC power supply cable blows and the transceiver becomes
inoperable, correct the cause of the problem, and then replace the fuse with a new one of
the correct (25 Amp) rating.
Caution: When replacing the fuse, be sure to disconnect the power supply cable from
the transceiver and from the external DC power supply.
Replacing the fuse of the DC power supply cable
1. Prepare a new fuse.
Use a fuse with a rating of 25 A.
Caution: Never attempt to use a fuse that is
not of the specified rating
2. Open the fuse holder as shown in the dia-
gram on the right.
3. Remove the blown fuse.
4. Attach the new fuse.
5. Close the fuse holder.
FTM-3200DR Operating Manual

Maintenance

35