Memory Operation; Memory Storage; Split Memory; Naming A Memory Channel - Yaesu FTM-3200DR Operating Manual

Hide thumbs Also See for FTM-3200DR:
Table of Contents

Advertisement

Memory Operation

The FTM-3200DR provides a wide variety of memory system resources. These include:
r 199 "basic" memory channels, numbered "1" through "199".
r A "Home" channel, providing storage and quick recall of one prime frequency.
r 10 sets of band-edge memories, also known as "Programmable Memory Scan" chan-
nels, labeled "L0/U0" through "L9/U9".
Each memory may be appended with an alphanumeric label of up to 8 characters, for
quick channel recognition.

Memory Storage

1. In the VFO mode, select the desired frequency, repeater shift, CTCSS/DCS tone, and
TX power level.
2. Press and hold the [ V/M ( MW )] key for one
second.
A memory number will appear in the bottom
right corner of the display.
Note: If the channel number is blinking,
there currently is no data stored on
that channel; if the channel number is
not blinking, that channel is currently
"occupied" by other frequency data.
3. Within five seconds of pressing the [ V/M ( MW )] key, use the DIAL knob to select the
desired memory into which you wish to store the frequency.
Note: While operating in the Memory Storage mode, the keypad of the MH-48A6JA
Microphone may be used to enter the memory channel number directly.
To do this, enter the desired Channel Number on the keypad and then press the
[ # ] key. Refer to the "For example" of the "Memory Recall from the Microphone
Keypad" on next page.
4. Press the [ V/M ( MW )] key again, this time momentarily, to store the displayed data into
the selected memory channel slot.
5. To store additional frequencies, repeat steps 1 through 4, remembering to set the re-
peater shift, CTCSS/DCS tone, and TX power level, as appropriate.

Split Memory

A separate transmit frequency may be registered to a memory channel to which a receive
frequency has already been registered.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Naming a Memory Channel

You may also append an alphanumeric "Tag" (label) to each memory, to aid in recollection
of the channel's use (such as club name, etc.).
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
24
VOL
SQL
REV
D/A
TXPO
D W
FTM-3200DR Operating Manual
DIAL
M H z
V / M
M W
SETUP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents