Dcs Search; Epcs (Enhanced Paging & Code Squelch); Operation; Split Tone Operation - Yaesu FTM-3200DR Operating Manual

3. Rotate the DIAL knob to select "DCS", then
press and hold the [ MHz ( SETUP )] key for
over one second.
Displays " " on the screen. The squelch opens only when receiving a signal con-
taining the corresponding DCS code.
Note: From the Setup Menu, you can change the DCS setting.
DCS CODE 9 à The DCS code can be selected from 104 codes.
BELL 6

DCS Search

When the DCS code being transmitted by another station is not known, you can tune the
radio to the incoming signal and activate DCS code scan to search for and identify the
DCS code being used.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
The following features are also available:
EPCS (Enhanced Paging & Code Squelch) Operation
Use the pager code consisting of two CTCSS tones to exchange communications with
specified stations.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Split Tone Operation

The FTM-3200DR can be operated in a "Split Tone" configuration that enables operation
on repeaters using a mix of both CTCSS and DCS control via the Setup menu.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

DTMF Operation

DTMF tones (Dual Tone Multi Frequencies) are the tones you hear when dialing from a
telephone keypad. The FTM-3200DR transceiver can transmit the DTMF codes by using
the keys on the microphone or recalling registered number strings from memories.
The maximum of 16-digit DTMF codes can be registered in up to 10 memory channels.
It is convenient to register telephone patch numbers, and network linking sequences to
the DTMF memory channels.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
FTM-3200DR Operating Manual
à A bell tone (beep) may be set to sound when signals containing
a corresponding DCS code are received.
Advanced Operation
23