Miscellaneous Settings; Programming The Key Assignments; Keyboard Beeper; Display Brightness - Yaesu FTM-3200DR Operating Manual

Miscellaneous Settings

Programming the Key Assignments

Default FTM-3200DR key functions have been assigned to the Microphone's [ P1 ] / [ P2 ] /
[ P3 ] / [ P4 ] keys at the factory. The user may change these key function assignments, if
quick access to another function is desired.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Keyboard Beeper

A key/button beeper provides useful audible feedback whenever a key/button is pressed.
If you want to turn the beeper off (or back on again).
Note: If you want to turn the beeper off (or back on again), see Setup Menu Item "3 BEP
KEY" on page 32.

Display Brightness

You can adjust the display brightness.
Note: See Setup Menu Item "22 LCD DMMR" on page 33.

Time-Out-Timer (TOT)

The "Time-Out Timer" (TOT) feature is designed to force the transceiver into the "receive"
mode after a preset time period of continuous transmission (the default is 3 minutes).
Note: See Setup Menu Item "46 TOT" on page 34.

Automatic Power Off (APO)

The "Automatic Power-Off" (APO) feature will turn the radio completely off after a user
defined period of PTT or key/button inactivity.
Note: See Setup Menu Item "1 APO" on page 32.

Busy Channel Lock-Out (BCLO)

The BCLO feature prevents the transmitter from being activated whenever a signal strong
enough to break through the "noise" squelch is present on the frequency.
Note: See Setup Menu Item "2 BCLO" on page 32.

TX Deviation Level

You can reduce the receiver bandwidth and transmit deviation when operating on closely
spaced frequencies (channel spacing of 12.5 or 15 kHz). The reduced transmitter devia-
tion will minimize adjacent channel interference to other users.
Note: See Setup Menu Item "52 W/N DEV" on page 34.

MIC Gain Setting

At the factory, the microphone gain has been programmed so that it should be satisfac-
tory for the supplied MH-48A6JA Microphone. If you use an after-market microphone or
connect a TNC, you may wish to set a different Mic Gain level.
Note: See Setup Menu Item "24 MIC GAIN" on page 33.
30
FTM-3200DR Operating Manual