Park - AT&T System 25 User Manual

Park

Parked calls are similar to held calls except that they can be
picked up from any telephone. Any call can be parked on the
SLAC, but only one call can be parked at a time. On the
Selector Console, eight calls can-be
(However, only outside calls can be
Console.)
See your System Administrator for
Parking a Call on the SLAC
Press
1
HOLD
The light next to the button of the held call blinks.
Press another
2
.
* 5
Dial
3
Listen for confirmation tone and dial tone.
4
If the call is for someone else, dial or page that person and
5
identify the extension number where the call is parked.
Hang up.
6
If the parked call is not answered within a preset
NOTE:
interval (the default time is two minutes), the call will return
to the console on the button where it is held. Answer it as
you would any incoming call.
Parking Calls on the Selector Console
Press the Group Select and DXS buttons for one of the
1
Selector Console Park codes. For example, if one of the
codes is 801, press Group Select button 800 and then press
DXS button 01.
When you do this, the call will be removed from your SLAC.
32
.
button and listen for dial tone.
LOOP
(Continued)
parked simultaneously.
parked on the Selector
Selector Console Park codes.