Suzuki 2006 SX4 Service Manual page 385

Wheel Alignment Specifications
Toe "b" – "a"
2WD:
• Front: IN 1 ± 1 (mm) IN 0.0393 ± 0.0393 (in.)
• Rear: IN 5 ± 5 (mm) IN 0.1969 ± 0.1969 (in.)
4WD:
• Front: IN 2 ± 1 (mm) IN 0.0787 ± 0.0393 (in.)
• Rear: IN 5 ± 5 (mm) IN 0.1969 ± 0.1969 (in.)
Toe degree "d" Each wheel
2WD:
• Front: IN 1' ± 2'
• Rear: IN 17' ± 17'
4WD:
• Front: IN 7' ± 2'
• Rear: IN 17' ± 17'
Camber "c"
2WD:
• Front: –10' ± 1°
• Rear: –1° ± 1°
4WD:
• Front: +16' ± 1°
[A]
Specifications
S6RW0C2107001
F
"d"
"a"
"b"
[A]: Toe-in (Top view)
[B]: Camber (Front view)
Suspension General Diagnosis:
• Rear: –1° ± 1°
Caster
2WD: 3° 40' ± 2°
4WD: 3° 34' ± 2°
Side Slip (On one person) *
2WD: 0 to IN 3.0 (mm/m) 0 to IN 0.118 (in./3.3 ft)
4WD: 0 to IN 3.0 (mm/m) 0 to IN 0.118 (in./3.3 ft)
Steering Angle (Turning Angle)
2WD:
• Inside: 36.0° ± 2°
• Outside: 32.1° (Reference information)
4WD:
• Inside: 37.4° ± 2°
• Outside: 32.6° (Reference information)
NOTE
• Toe value in the specification table was
measured by using a toe-in gauge.
• Rear toe, front camber, rear camber and
front caster are not adjustable.
[B]
1. Center line of wheel F. Forward
2. Body center
1
1
2
90˚
"c"
2A-4
I7RW01210001-02