Toro Reelmaster 7000 Service Manual page 155

For cartridge valve service procedures, see Control
Manifold Cartridge Valve Service in this section. Refer
to Figure 90 for cartridge valve and plug installation
torque.
IMPORTANT: A flow control orifice is placed be-
neath the hydraulic fittings in lift control manifold
ports C2, C3 and C4. If any of these fittings are re-
moved from the manifold, make sure to remove ori-
fice and label its position for assembly purposes.
Also note location of groove in orifice for assembly
purposes. When installing the orifice in the man-
ifold, make sure that the orifice is flat in the base of
the port. Manifold damage is possible if the orifice
is cocked in the port.
Reelmaster 7000 Page 4 - - 121 Hydraulic System