E. Installing the Optional Heat-Zone
• Remove the knockout from the fireplace and discard it
See Figure 8.5.
• Center the duct collar around the exposed hole and
attach it to the fireplace with 3 screws. Note: Do this
BEFORE final positioning of fireplace.
• Determine the location for the air register/fan housing
assembly.
Reference the Heat-Zone
remaining installation steps.
HEAT-ZONE
GAS
®
ATTACHES HERE
Figure 8.5 Heat-Zone
Knockout
®
38
Heat & Glo • 6000CLX-IPI-S, 6000CLX-IPI-T, 8000CLX-S, 8000CLX-IPI-T • 2166-900 Rev. AN • 2/16
Gas Kit
®
Gas kit instructions for the
®