Installing The Optional Heat-Zone Gas Kit - Heat & Glo TRUE-36C Installation Manual

E. Installing the Optional Heat-Zone
Kit
• Locate the Heat-Zone
®
the appliance. See Figure 5.6. Remove the knockouts
from the appliance with a tin snips.
• Center the duct collar around the exposed hole and
attach it to the appliance with 3 screws. Note: Do this
BEFORE fi nal positioning of the appliance.
• Determine the location for the air register/fan housing
assembly.
Reference the Heat-Zone
remaining installation steps.
HEAT ZONE LOCATION
®
LEFT AND RIGHT SIDES
Figure 5.6 Heat Zone Cover Plate
28 Heat & Glo • TRUE-36, TRUE-42, TRUE-50 Installation Manual • 2282-980 Rev. F • 8/14
®
ports on the left and right sides of
Gas Kit instructions for the
®
Gas