Installing The Optional Heat-Zone Gas Kit - Heat & Glo 6000CL-IPI-S Owner's Manual

E. Installing the Optional Heat-Zone
• Remove the knockout from the fi replace and discard it
See Figure 8.5.
• Center the duct collar around the exposed hole and
attach it to the fi replace with 3 screws. Note: Do this
BEFORE fi nal positioning of fi replace.
• Determine the location for the air register/fan housing
assembly.
Reference the Heat-Zone® Gas kit instructions for the
remaining installation steps.
HEAT-ZONE GAS
®
ATTACHES HERE
Figure 8.5 Heat-Zone Cover Plate
®
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. AB • 3/15
Gas Kit
®
39