Heat & Glo 6000CLX-IPI-T Owner's Manual page 54

Finishing Material Thickness:
1-4 inches maximum
NOTICE: Remove finishing strips before firing appliance.
FINISHING
MATERIAL
DECORATIVE FRONT
(Outside decorative front width)
(Includes 1/8 in. opening each side of decorative front)
(Outside decorative front width)
(Includes 1/8 in. opening each side of decorative front)
Finishing material thickness, 1-4 inches maximum
B = Top of decorative front to bottom of fireplace.
D = Bottom of Finishing Material to Bottom of Fireplace
Figure 13.6 Finishing Material Thickness Greater Than One Inch
54 Heat & Glo • 6000CLX-IPI-S, 6000CLX-IPI-T, 8000CLX-S, 8000CLX-IPI-T • 2166-900 Rev. AN • 2/16
FINISHING
STRIPS USED
NON-COMBUSTIBLE
FINISHING MATERIAL
FINISHING
MATERIAL
A
C
B
A
C
Finishing Material Thickness:
0-4 inches maximum
NOTICE: Remove finishing strips before firing appliance.
FINISHING MATERIAL
Figure 13.7 Folio/CF Inside Fit
D
Inches
A 44-1/16
B 35-15/16
C 44-5/16
D 36-5/16
FINISHING STRIP NOT USED
(See Figure 13.8 for
removal instructions)
NON-COMBUSTIBLE
FINISHING MATERIAL
DECORATIVE FRONT
FINISHING MATERIAL
8000 Models
Millimeters Inches
1119 37-1/16
913 34-1/16
1126 37-5/16
922 34-7/16
6000 Models
Millimeters
941
865
948
882