E. Installing the Optional Heat-Zone
• Remove the knockout from the fi replace and discard it
(see Figure 8.5).
• Center the duct collar around the exposed hole and
attach it to the fi replace with 3 screws. Note: Do this
BEFORE fi nal positioning of fi replace.
• Determine the location for the air register/fan housing
assembly.
Reference the Heat-Zone
remaining installation steps.
HEAT-ZONE® GAS
ATTACHES HERE
Figure 8.5 Heat Zone Cover Plate
34
Gas Kit
®
®
Gas kit instructions for the
Heat & Glo • 6000CMOD-IPI, 8000CMOD-IPI • 2241-900 Rev. P • 5/15