D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Figure 7- 10. Upload Firmware to CF window
Enter the file name and path into the space provided and click Start. This will begin the firmware upload from
the host to the CompactFlash card for later use.
Figure 7- 11. Save Firmware CF window
Upload Config to CF
The user may save a certain configuration setting of the Switch to the CompactFlash for future implementation.
Initially, the user must save the current configuration file to the NV-RAM on the Switch by going to the Save
Changes window, also in the Maintenance folder, and click the Save Configuration button. After the
configuration has been saved, the user should open the Upload Config to CF window by clicking Maintenance
> CF Services > Upload Config to CF. In the following window, enter a new path name (e.g. c:/3324sri.cfg) in
the File Name field and click Start.
Figure 7- 12. Upload Config to CF window
Upon initiation of the upload sequence, the following window will appear, notifying the user of the file transfer
status and completion.
Figure 7- 13. Save Settings CF window
176