Browse Router Port; Port Access Control - D-Link DGS-3324SRi User Manual

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Queries
Reports
Note: To configure IGMP snooping for the DGS-3324SRi, go to the
Configuration folder and select IGMP. Configuration and other information
concerning IGMP snooping may be found in Section 4 of this manual
under Configuring IGMP.

Browse Router Port

This displays which of the Switch's ports are currently configured as router ports. A router port configured by a
user (using the console or Web-based management interfaces) is displayed as a static router port, designated by
S. A router port that is dynamically configured by the Switch is designated by D.

Port Access Control

The following screens are used to monitor 802.1x statistics of the Switch, on a per port basis. To view the Port
Access Control screens, open the monitoring folder and click the Port Access Control folder. There are five
screens to monitor.
A read only field showing the status of the Querier State. Disabled implies
that the Switch is not transmitting IGMP Snooping Query packets, while
Enabled means those packets are being transmitted.
The total number of reports received for this group.
Figure 6- 19. Browse Router Port
155