D-Link DGS-3324SRi User Manual page 127

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Configure each IP interface individually using the OSPF Interface Settings – Edit menu. Click the Apply button
when you have entered the settings. The new configuration appears listed in the OSPF Interface Settings table.
To return to the OSPF Interface Settings table, click the Show All OSPF Interface Entries link.
OSPF interface settings are described below. Some OSPF interface settings require previously configured OSPF
settings. Read the descriptions below for details.
Parameter
Interface Name
Area ID
Router Priority
Hello Interval
Figure 4- 71. OSPF Interface Configuration
Figure 4- 72. Edit OSPF Interface Settings menu
Description
Displays the of an IP interface previously configured on the Switch.
Allows the entry of an OSPF Area ID configured above.
Allows the entry of a number between 0 and 255 representing the OSPF
priority of the selected area. If a Router Priority of 0 is selected, the Switch
cannot be elected as the Designated Router for the network.
Allows the specification of the interval between the transmission of OSPF
Hello packets, in seconds. Between 5 and 65535 seconds can be specified.
The Hello Interval, Dead Interval, Authorization Type, and Authorization Key
should be the same for all routers on the same network.
112