D-Link DGS-3324SRi User Manual page 88

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Type
Priority(0-7)
Replace Dscp(0-63)
Vlan Name
Source Mac
Destination Mac
802.1p(0-7)
Ethernet Type
To view the Access Rule Display, click Display for an entry in the Access Rule Table.
Selected profile based on Ethernet (MAC Address) or IP address.
Ethernet instructs the Switch to examine the layer 2 part of each
packet header. IP instructs the Switch to examine the IP address in
each frame's header.
Select this option to instruct the Switch to use the 802.1p priority
value entered in the adjacent field for packets that meet the criteria. A
number between 0 − lowest priority, and 7 − highest priority, can be
entered.
Select this option to instruct the Switch to replace the DSCP value (in
a packet that meets the selected criteria) with the value entered in the
adjacent field.
Allows the entry of a name for a previously configured VLAN.
Source MAC Address - Enter a MAC Address for the source MAC
address.
Destination MAC Address- Enter a MAC Address mask for the
destination MAC address.
Enter a value from 0-7 to specify that the access profile will apply only
to packets with this 802.1p priority value.
Specifies that the access profile will apply only to packets with this
hexadecimal 802.1Q Ethernet type value (hex 0x0-0xffff) in the
packet header. The Ethernet type value may be set in the form: hex
0x0-0xffff, which means the user may choose any combination of
letters and numbers ranging from a-f and from 0-9999.
Figure 4- 45. Access Rule Display window (Ethernet)
73