Reboot Device - D-Link DGS-3324SRi User Manual

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
NOTE: only the Reset System option will enter the factory default
parameters into the Switch's non-volatile RAM, and then restart the
Switch. All other options enter the factory defaults into the current
configuration, but do not save this configuration. Reset System will
return the Switch's configuration to the state it was when it left the
factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other
configuration parameters to their factory defaults. If the Switch is reset with this option enabled, and Save
Changes is not executed, the Switch will return to the last saved configuration when rebooted.
The Reset Config option will reset all of the Switch's configuration parameters to their factory defaults, without
saving these default values to the Switch's non-volatile RAM. If the Switch is reset with this option enabled, and
Save Changes is not executed, the Switch will return to the last saved configuration when rebooted.
In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save
these parameters to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to
Reset Config (above) followed by Save Changes.

Reboot Device

The following menu is used to restart the Switch.
Clicking the Yes click-box will instruct the Switch to save the current configuration to non-volatile RAM before
restarting the Switch.
Clicking the No click-box instructs the Switch not to save the current configuration before restarting the Switch.
All of the configuration information entered from the last time Save Changes was executed, will be lost.
Click the Restart button to restart the Switch.
Figure 7- 18. Factory Reset window
179