Download Firmware From Cf - D-Link DGS-3324SRi User Manual

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
that is electrically compatible with an IDE disk drive. It is recommended that the user store a backup of the
startup configuration file on the CompactFlash card of the control module and on a central server. When you
save the startup configuration file, the Switch stores it in two places: in the CompactFlash and the PC card of the
primary control module. When the Switch boots, it will try to use the primary configuration file on the PC card
and, if for some reason the Switch cannot use the file, it automatically uses the secondary configuration file on
the CompactFlash. If the startup file becomes corrupted in both places, the DGS-3324SRi will use its default
configuration.
To install the CompactFlash card, insert it into the available slot on the back of the Switch, as shown below, and
ensure that the card "clicks" into place. When correctly inserted, the CF Card Button should protrude. To eject
the card from the slot, press the CF Card button in and the CompactFlash card should pop out.
NOTE: This CompactFlash Card is hot swappable, and therefore it is unnecessary
to power down the Switch when changing CompactFlash cards.

Download Firmware From CF

To download firmware saved on the CompactFlash card, open the Maintenance folder to the CF Services folder
and click Download Firmware from CF, which will open the following window:
Enter the file name and path into the space provided and click Start. This will begin the firmware download from
the CompactFlash card to the Switch. Upon completion of the download, the Switch will reboot and the user will
have to re-login to access the Web manager.
Figure 7- 5. CF Card Installation
Figure 7- 6. Download Firmware from CF window
174