Admin And User Privileges - D-Link DGS-3324SRi User Manual

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Modify or delete an existing user account in the User Account Control Table – Edit. To delete the user account,
click on the Delete button. To change the password, type in the New Password and retype it in the Confirm
New Password entry field. Choose the level of privilege (Admin or User) from the Access Right drop-down
menu. To delete a user account using CLI use the command delete account. To change an existing account use
config account.
From the Main Menu, highlight Setup User Accounts and press Enter, then the User Account Management
menu appears.

Admin and User Privileges

There are two levels of user privileges: Admin and User. Some menu selections available to users with Admin
privileges may not be available to those with User privileges.
The following table summarizes the Admin and User privileges:
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration Files
System Utilities
Factory Reset
User Account Management
Add/Update/Delete User Accounts
View User Accounts
After establishing a User Account with Admin-level privileges, be sure to save the changes by opening the Save
Changes window in the Monitoring folder and clicking the Save Configuration button.
Figure 3- 9. Modify User Accounts
Admin
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Admin and User Privileges
19
User
Read Only
Read Only
Read Only
No
Ping Only
No
No
No