Storing, Deleting, And Using Original Sizes; Storing Or Deleting An Original Size - Sharp MX-M350U Operation Manual

STORING, DELETING, AND USING
ORIGINAL SIZES
Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
copy that size of document.
● To cancel an original size storing, using, or deleting operation, touch the [ORIGINAL] key on the screen.

Storing or deleting an original size

1 Touch the [ORIGINAL] key.
0
AUTO
ORIGINAL
AUTO
EXPOSURE
Touch the [CUSTOM SIZE] key.
2
AUTO
AB AUTO
EXPOSURE
MANUAL
INCH
AUTO
PAPER SE
CUSTOM
100%
SIZE
E INPUT
COPY RAT
Touch the [STORE/DELETE] key.
3
AUTO
MANUA
CUSTO
SIZE
LL STORE/DELETE
Touch the original size key (
4
you wish to store or delete.
X68 Y78
RECALL STORE/DELETE
To delete or change a stored size, touch the key
that shows the size that you wish to delete or
change.
●If you are storing an original size, go to step 5.
●To delete or change an original size, go to
step 7.
4-6
A4
) that
To store an original size,
touch a key that does not
show a size (
Keys that already have
an original size stored
will show the stored size
( ).
X68 Y78
5 Enter the X (width) and Y (length)
dimensions of the original with the
keys.
X
CANCEL
Y
A
(64 432)
420
X
mm
(64 297)
Y 297
mm
RECALL
can be entered in Y.
6 Touch the [OK] key.
The original size entered in step 5 is stored in the
key selected in step 4.
To exit, touch the [ORIGINAL] key.
7 When you touch a key that shows an
original size in step 4, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
●To cancel the procedure, touch the [CANCEL]
key.
●To delete the selected original size, touch the
[DELETE] key.
●To change the original size stored in the key,
touch the [AMEND] key. The screen of step 5
will appear to let you change the size.
8 To exit, touch the [ORIGINAL] key.
■ USING A STORED ORIGINAL SIZE
).
1 Follow steps 1 to 2 of "STORING OR
DELETING AN ORIGINAL SIZE".
Touch the original size key that you wish
2
to use.
X68 Y78
RECALL
STORE/DELETE
Touch the [OK] key.
3
The stored original size is called up.
X (width)
OK
selected.
Enter X and then touch
the ( ) key to enter Y.
A width of 64 to 432 mm
can be entered in X, and
STORE/DELETE
a length of 64 to 297 mm
is initially