Memory Module - HP ZBook Studio G 315-ap000 – 15ap099 Maintenance And Service Manual

Memory module

Description
For use with Core processors:
16 GB
8 GB
4 GB
For use with Xeon processors:
16 GB, ECC
8 GB, ECC
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
various system problems.
To update BIOS:
1. Navigate to www.hp.com.
2. Click Support & Drivers > Drivers & Software.
3. In the Enter a product name/number box, type the computer model information, and then click Search.
4. Click the link for the computer model.
5. Select the operating system, and then click Next.
6. Under Step 2: Select a Download, click the BIOS link.
7. Click the link for the most recent BIOS.
8. Click the Download button, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service door (see
5. Remove the bottom cover (see
6. Disconnect the battery (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Failure to update the computer to the latest BIOS prior to installing new memory may result in
Service door on page
Bottom cover on page
Battery on page
28).
29).
30).
Spare part number
820571-001
820570-001
820569-001
835886-001
835887-001