Touchpad - HP ZBook Studio G 315-ap000 – 15ap099 Maintenance And Service Manual

TouchPad

Description
TouchPad
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service door (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the TouchPad:
1. Disconnect the cable from the system board (1).
2. Remove the six Phillips PM2.0×2.0 screws (2) that secure the TouchPad to the top cover.
3. Lift the TouchPad out of the computer (3).
Reverse this procedure to install the TouchPad.
44 Chapter 6 Removal and replacement procedures for authorized service provider parts
Service door on page
Bottom cover on page
Battery on page 30).
28).
29).
Spare part number
840962-001