Table of Contents
Advertisement
Hardware Diagnostics
SAF-TE TEST (SAF) Error Log
Status
01
Log Utilities
03. LOG UTILITIES logs error information generated while a test is in progress. The
results are stored in RAM.
Select 03. LOG UTILITIES from the Hardware Diagnostics Program Main Menu to check
the error logs. The following screen appears:
The screen contains the following information:
XXXXX ERRORS shows the number of errors.
PASS COUNT is displayed if the test parameter "Test Loop" is set as "Yes" in the test.
CNT shows the number assigned according to the order of occurrence of the error.
TEST XXX XX XXX
- Where digits 1 - 3 show the abbreviation of the test in which the error occurred.
MEMORY TEST
KEYBOARD TEST
FLOPPY DISK
TEST
PRINTER TEST
SCSI DISK TEST
- Where digits 4-5 shows the subtest number in which the error occurred.
Error name
SAF-TE TEST ERROR
Test
Abbreviation
RAM
KBD
FDD
PRT
HDD
Hardware Diagnostics Program
SAF-TE controller has not been
detected
Test
NPX TEST
SCSI TEST
CD-ROM TEST
SAF-TE TEST
Meaning
Abbreviation
NPX
SCS
CDR
SAF
119
Advertisement
Table of Contents
