Table of Contents
Advertisement
System Configuration Setup
❖
Serial Port 2 Mode - Set this option to "Normal."
❖
Duplex Mode - Set this option to "N/A."
❖
Onboard Parallel Port
Auto (default)
278/IRQ5
Disable
3BC/IRQ7
❖
Parallel Port Mode
Normal
EPP
ECP (default)
❖
Parallel Port Mode - Set this option to "Auto."
❖
On-board Midi In/Out - Set this option to "Disabled."
Not supported by default (JP20)
Automatically sets the parallel port address
Enables the onboard LPT port with address
278/IRQ5
Disables the onboard LPT port
Enables the onboard LPT port with address
3BC/IRQ7
Uses the parallel port as a Standard Printer
Port
Uses the parallel port as an Enhanced
Parallel Port
Uses the parallel port as an Extended
Capabilities Port
85
Setup
Advertisement
Table of Contents
