Table of Contents
Advertisement
System Configuration Setup
❖
PCI VGA Palette Snoop - Determines whether to monitor the VGA card installed in a
PCI slot.
Enabled
Disabled
(default)
❖
DMA Channel (0,1,3,5,6,7) - Select the PCI Plug and Play (PCI/PnP) option.
❖
IRQ (3,4,5,7,9,10,11,12,14,15), DMA (0,1,3,5,6,7) assigned to - Assigns each IRQ
and DMA. By default, IRQ 7, 12, 14, and 15 are "legacy ISA" and others are "PCI/ISA
PnP".
Legacy ISA
PCI/ISA PnP
Integrated Peripherals
HINT: The settings shown are the recommended values.
❖
Load BIOS default (F6 key) - Resets all options in a submenu to their default value.
To do so, you may need to reset the Magnia 510D default settings in this and other
submenus as well. For more information, refer to the recommended settings shown in
the submenu.
❖
Load setup defaults (F7 key) - Resets all BIOS setup options to their default values.
To do so, you need to reset the Magnia 510D default settings in the submenu as well.
See
How to return to the Toshiba defaults
AMIBIOS SETUP - INTEGRATED PERIPHERAL
(C)1999 American Megatrends, Inc. All Rights Reserved
OnBoard IDE
OnBoard FDC
OnBoard Serial Port 1
OnBoard Serial Port 2
Serial Port 2 Mode
Duplex Mode
OnBoard Parallel Port
Parallel Port Mode
Parallel Port DMA
Parallel Port IRQ
Sample Integrated Peripherals
Enables this function
Disables this function
The resource is used by legacy ISA devices
The resource is used by PCI PnP devices
:Both
:Auto
:Auto
:Auto
:Normal
:N/A
:Auto
:ECP
:Auto
:Auto
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
on page 87.
↑↓←→: Select Item
PU/PD/+/- : Modify
83
Setup
Advertisement
Table of Contents
