Table of Contents
Advertisement
Appendix D:
Device Logs
The table in this section is a device log. Use it to record information about the system and
the optional devices that you have added or removed. You may need this information
when using the Setup utility.
Keep the model numbers and serial numbers of the server and system board recorded in
the log. The model number and serial number of the server are on the label attached to
the back of the server. The serial number of the system board is at the left end of the
board close to the expansion card panel.
Record the model numbers and serial numbers of the system components, the dates
when you replaced components, and the names of component manufacturers. Also,
record hard disk drives, expansion cards, additional option cards, and all other
components that you have added to the system.
The positions of model numbers and serial numbers of system components vary
depending on the make. Refer to the manufacturers' documentation for the exact
positions of these numbers.
144
Advertisement
Table of Contents
