Table of Contents
Advertisement
System Configuration Setup
❖
Suspend Mode - Determines whether the server enters a low power state when it has
been inactive for a specified length of time.
Disable
(default)
1 min to 1 hour
❖
Display Activity - Sets a power saving mode when the monitor is turned back on.
Ignore (default)
Monitor
❖
IRQ3 ~ IRQ15 - Specifies interruptions to be monitored by the Power Saving function.
Monitor
Ignore
Set IRQ3 ~ IRQ15 as follows:
IRQ3 - Monitor
IRQ4 - Monitor
IRQ5 - Ignore
IRQ7 - Monitor
IRQ9 - Ignore
IRQ10 - Ignore
IRQ11 - Ignore
IRQ13 - Ignore
IRQ14 - Monitor
IRQ15 - Ignore
❖
Soft-off by PWR-BTTN - Determines whether the Power button switches the server
off immediately or after a 4 second delay.
Instant-off
(default)
Delay 4 sec.
Disables Suspend Mode
Sets the period of inactivity which causes the
server to enter Suspend Mode
Switches to a power saving mode when the
monitor is turned on.
Does not switch to a power saving mode
when the monitor is turned on.
Monitors interruptions.
Ignores interruptions.
Power Off takes effect immediately
Soft switch introduces a 4 second delay
80
Setup
Advertisement
Table of Contents
