Machine Firmware Update - Ricoh Kr-P2 Field Service Manual

5. System Maintenance Reference
Upload/Download
In this service manual, "upload" and "download" have these meanings:
• Upload: Copying data from the printer to the SD card
• Download: Copying data from the SD card to the printer
Network Connection
A print job sent to the machine during firmware update will interrupt the procedure. Before you start the
firmware update procedure tell the operator:
• The machine must be disconnected from the network.
• The machine cannot be used during firmware update.
5

Machine Firmware Update

Each program must be updated one a time. Follow the procedure below to update one program.
1. Prepare a card that contains the required program.
2. If the machine is on, switch it off.
3. Remove the SD card cover ( x 1).
4. Insert the SD card into Slot 2.
5. Turn on the power.
6. "Please Wait" appears, then you will see "Preparing to Start Firmware Update...".
80